Separation Processes
Heat Transfer Processes  
Unit Operations  

Separations Processes:
 

ANOSH CONSULTANCY SERVICES could provide an unmitigated expertise.

  1. Reclamation of a valuable insoluble solid phase

  2. Reclamation of a valuable soluble solid phase.

  3. Reclamation and Recycle of the most intrinsically valuable WATER.

  4. Removal of an unwanted solid fraction

To achieve the above objectives ANOSH CONSULTANCY could provide the expertise to professionally.

Test, Evaluate, Select, and Scale-Up the most cost effective Solid-Liquid Separations Equipment for the task, from a wide array of available alternatives such as :

 1.  DECANTER CENTRIFUGE
 2.  VIBROSCREEN
 3.  PEELER CENTRIFUGE
 4.  PUSHER CENTRIFUGE
 5.  BATCH BASKET CENTRIFUGE
 6.  ROTARY VACUUM BELT FILTER
 7.  HORIZONTAL VACUUM BELT FILTER
 8.  HERRIOTT-WATT TYPE HIGH SPEED HORIZONTAL BELT FILTER
 9.  BELT PRESS
10. CARTRIDGE FILTER
11. HYDRO-CYCLONE

Select the most appropriate FLOCCULANT SOLUTION PREPARATION and flocculant dosing systems with.

Provide expert guidance in the safe operation of CENTRIFUGAL SEPARATIONS EQUIPMENT when operating in hazardous process environments .

Carry out simultaneous comparative performance testing of separations equipment supplied by competing vendors both on pilot and commercial scale.

Apply solid liquid separations expertise in Oil Refinineries and Power Plants with winnig strategies for DESUPHURISATION.

 

 
Heat Transfer Processes:
 

ANOSH CONSULTANCY SERVICES would provide you expert technical advice in the application of SUBMERGED COMBUSTION TECHNOLOGY, wherein heat-transfer efficiencies of greater than or equal to 90% are obtained. The technology is useful to process industry in applications such as:

EVAPORATION and CONCENTRATION of liquids, both corrosive and non-corrosive

Heating large quantities of process liquids, continuously or batch-wise

Heating of Pickle Liquors in Steel Pickling Plalnt

CALCINATION of Minerals e.g. GYPSUM, LIMESTONE

DEHYDRATION of Crystalline Salts e.g. GLAUBER'S SALT (Na2SO4 .10H2o)

Anosh Consultancy could further provide advisory service to process industry on:

Testing and Evaluation of Thermal Efficiency of DRYERS and CALCINERS

Trouble-Shooting of Heat Transfer Equipment by carrying out Dryer Surveys of Convective Dryers, Fluid-Bed Dryers, and Vacuum Dryers used in production processes.


Top
 
Unit Operations:
 

ANOSH CONSULTANCY SERVICES could also provide an expert advice and technical support with a few unit operations. These are:

   
Selection and Application of HIGH-POWER ULTRASONICS and Centrifugal Separations in Cell-Disintegration, Herbal Extractions, Bio-Diesel production,and Bio-pharmaceutical production.
   
Selection and Application of appropriate Pneumatic Conveying Systems, carry out vendor selection, evolve procurement specifications, and carry out pilot & field tests whenever and wherever necessary.
   
Design and Selection of Agitation and Mixing equipment with specific emphasis on Mixing Patterns, Reactor Design, and Tracer Analysis
   

Selection, Evaluation and Application of Solvent-Venting Explosion Resistant Ovens with emphasis on Safety. The purpose of a solvent venting system is to mitigate the potential of a fire hazard, in the oven.

   

Selection, Specification, Application and Testing of Anti-Corrosive Coatings and Linings of high-performance fluoropolymers to process equipment e.g Storage Tanks, Reactors, Agitators, Basket Centrifuges, ISO-Containers used in handling and transport of corrosive chemicals e.g.Bromine.


Top